YES Basic 19/20
This product is currently not in stock or discontinued. Contact our customer service for an alternative or delivery estimate.
- Our customers rate us 9.8 out of 10
- Fast world wide shipping
- Ordered before 16:00 CET, Shipped the same day
Developed as a go-to, ride-it-all deck, the Basic has been refined over the years to the point that both pros and newbies reach for it on a regular basis. The UnderBite outline extracts more arc, more hold and a better carving experience out of every design we apply it to and the Basic was the genesis of it all.
- Full Poplar
Our baseline core for tip to tail woodcore snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.
Just like it says. This material is formed by extrusion. It is softer than our other two bases, which isn’t necessarily a bad thing. At the speeds many of us ride, this material is actually quicker (gets up to speed faster) than sintered when waxed correctly. You may have your own proof of this when you’re smoking by someone with a dried out “high-end” base. It also retains wax better because it’s more porous and is easy to fix with a P-Tex stick if you get scratches in it.
A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.
- Underbite Edges
TWS Good Wood winning tech expands to the Hel this year! UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
|Yes Basic 19/20 Sizechart|
|Effective Edge (mm)||1080||1105||1130||1150||1175||1158||1200||1200||1220||1230|
|Tip Width (mm)||286||289.6||291.3||293.7||295.4||302.9||298.1||306.1||299.1||307.7|
|Waist Width (mm)||245||247||248||250||251||259||253||261||254||263|
|Tail Width (mm)||286||289.6||291.3||293.7||295.4||302.9||298.1||306.1||299.1||307.7|
|Sidecut Radius (m)||6.80||6.80||7.00||7.20||7.40||7.50||7.60||7.60||7.80||7.90|
|Stance Range (in)||17.4 - 20.6||17.9 - 21.1||18.9 - 22.1||19.4 - 22.6||20.4 - 23.6||20.9 - 24.1||20.9 - 24.1||21.4 - 24.6||21.9 - 25.1||21.9 - 25.1|