Furberg Freeride Split 21/22
- Our customers rate us 9.8 out of 10
- Fast world wide shipping
- Ordered before 16:00 CET, Shipped the same day
|Weight class||3.0kg - 3.5kg|
|Supplied accessories||Nothing included|
The Furberg Freeride was developed to tackle any kind of snow and terrain you might find in the backcountry. The combination of high-speed stability, maneuverability and catch-free properties has made the Freeride one of the most talked about snowboards of the past few years. Its long sidecut radius and reverse sidecut in tip and tail make this board calm, forgiving and catch free. With Floorboard Technology your split will feel as a solid. The updated core is between 250gr. and 350gr. lighter.
- Slightly shorter turning radius This year we have made the turning radius slightly shorter than previous years to make our snowboards more responsive and playful on hardpack. But don’t worry, our boards still have approximately a 70 % longer turning radius than the average freeride board.
- Low Camber The best compromise between the flotation of full rocker, responsiveness and grip of camber.
- Longer Rocker and Reverse Sidecut radiuses Allows our snowboards to be even more catch free and maintain direction better when on edge than before.
- Longer and higher nose Increases flotation and makes the board slide over irregularities in the snowpack with less resistance.
- Unisex sizes Women’s snowboards are often diluted versions of their standard counterparts, made with less strong and cheaper materials. Instead we make The Freeride and The Freeride Split in a size range between 150 and 170, all featuring the same materials. The smaller sizes are adapted to women and smaller guys. For example the 155 might be ridden by women looking for a big mountain snowboard or smaller guys who want a playful board to be used inbounds and in the backcountry.
- Sidecut Radius It is standard to use a longer turning radius on a freeride ski than on a slalom ski in the skiing industry; however, Furberg Snowboards is the only brand to adapt the turning radius for freeride snowboards. A longer turning radius generates better stability at higher speeds and, more importantly, gives the boards a calmer and more forgiving behavior by distributing the edge pressure over the entire contact length.
- Rocker and Reverse Sidecut When a board is ridden flat on the snow, a long rocker transition will make the nose of the board impact irregularities with a low angle of incidence and slide over with little resistance. Many snowboard brands are aware of this, but only Furberg has combined the rocker with a reverse sidecut in nose and tail to maintain this low angle of incidence when riding the board on edge. The long transitions of the reverse sidecut make the board turn more effortlessly since the typical pressure points at the end of the effective edge do not exist. The overall result is a very catch-free and surfy board.
- Poplar Pauwlonia Ash Core Along the edges, Furberg uses ash instead of poplar for improved durability. The rest of the core is a mix of poplar and paulownia, with the lighter wood in less critical areas. 250g and 350g lighter then the Poplar core.
- Triaxial Fiberglass Triaxial fiberglass is used to get a good torsional stiffness of the snowboard.
- Isosport 7500 Sintered The base is 1.3 mm thick, which is thicker than industry standard. This means that you can hit rocks harder without getting core shots and you can stone grind the base more times. Isosport 7500 Sintered is one of the fastest bases available on the market. The thicker base does add a few grams on the weight, but more importantly it gives the board a much longer life.
- Isosport Brushed Polyamide The Isosport Polyamide topsheet is one of the most durable topsheets on the market. The texture makes the topsheet very scratch resistant and less snow sticks to it. We also make all our topsheets in light colors to further avoid snow sticking to them. Dark colored topsheets get warmed up more by the sun and therefore more snow will freeze to them. This is a simple, yet effective way to save weight without compromising on durability and performance.
- UHMW PE The sidewalls are made of UHMW PE, Ultra High Molecular Weight Polyethylene. These are highly resistant against abrasion and almost impossible to crack (in contrast to ABS sidewalls). On our solid boards we also have an inner sidewall of Bamboo. Thanks to this hard and stiff inner sidewall the edges can take harder impacts without getting damaged. The inner sidewall adds a little bit of weight, which is why we have chosen to not have it on our splitboards.
- 2.1 x 2.0 mm Rockwell Hardness 48 Edges The edges are considerably beefier than the industry standard, to be able to withstand harder impacts without cracking or deforming. The edges are fully wrapped around the board for maximum durability.
|Furberg Freeride 2020/2021 Sizechart|
|Nose Width (mm)||273||280||287||295||303|
|Waist Width (mm)||246||253||260||267||274|
|Tail Width (mm)||261||268||275||283||291|
|Turning Radius (m)||11.6||12.2||12.8||13.4||14.0|
|Shoe Size (cm)||23-26||24-27||25-28||26-29||27-30|
|Rider Weight (kg)||45-60||50-70||60-90||70-100||75+|
|Board Weight (g)||2900||3000||3200||3400||3600|