Arbor Coda Rocker Splitboard + Skins 21/22

• The Rocker System
  Arbor's System Rocker shapes are for riders who want: A surfy ride with natural float, cleaner tracking across the snow, and more care-free turns and spins. Best in class true-rocker edge hold in the steeps, at higher speeds, and through any landing.

• Parabolic Profiling
  Arbor uses a unique shaping technique that replaces single radius arc found in traditional camber or rocker, with a more advanced parabolic profile. The design blends five separate radii together to create a parabolic arc, which gradually reduces the amount of rocker or camber toward the tip and tail. In Arbors System Rocker shapes, the design lowers the leading edge to improve edge hold. In the System Camber shapes, the design makes the leading edge less aggressive for smoother performance. The blended five radii design also drastically improves the ability to tune each shape in line for ability level, target terrain, and riding style.

• Thunderhead
  Arbor has a different nose profile for every type of terrain. The Thunderhead is suitable for big-mountain versatility & speed in the deepest snow.

• 4 Point Camber
  4 Point – 1.5 degrees, Park/Street Performance, Built in 1° De-Tune. The 4point System Camber is the optimal setup at speed, through steeps and deep carves.

• FSC Certified Higland Split Core
  Arbor's highly versatile FSC Certified Highland Core with additional insert and centerline components for a premium factory splitboard.

• RWD Carbon Uprights
  Two carbon fiber uprights running from the tip and tail to just past the inser ts. A set up that provides added landing durability and pop for bigger park and backcountry performance.

• Mixed Glassing
  A triax over biax lay–up that’s best for versatility: pow, backcountry, groomers, jumps, and more.

• Powerply Topsheet
  The Power Ply works like an added layer of fiberglass. During construction, the natural wood or bamboo fibers are turned into a composite layer inside the board, but the process takes time. They start with a log that must be soaked so that it can be sliced or “veneered” into sheets, which are then assembled into “faces”. The “faces” are then backed with a special fleece material, precision sanded, and pre laminated to a protective foil made in part from natural castor bean oil. The finished topsheet is at last ready to be built into a snowboard. In the end, the process makes Arbor Power Ply designs the most labor intensive snowboards on the market. The resulting performance, board life, finish quality, reduced reliance on man–made glues, coatings, and composites are worth the extra effort.
  
  
• Entropy Bio Resin
  All Powerplys and R.A.P. Topless Tech veneers are made with Entropy Bio-Resin, a replacement for traditional petroleum based resin that doesn’t affect performance or usability. The ingredients that go into Entropy Bio-Resin are sArbor’sced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% (when compared to its petroleum based equivalent).

• Bio-Plastic Topsheet
  One of the materials Arbor use in their quest to eliminate harmful pertrolium based plastics from their production cycle. Made from Castor Bean Oil, this eco-topsheet is extremely durable and water repellent.

• Sintered Plus Base
  Arbor's sintered plus base is a mid-density material that demonstrates increased speed and durability while maintaining the ease of repairCrossLink base is a mid-density material that demonstrates increased speed and durability while maintaining the ease of repair.
  
  
• Wend Natural Wax
  All boards are waxed and ready to use.

• ABS (recycled) Sidewall
  Provides enhanced durability while keeping the core safe from moisture.When a plastic alternative is unavailable, as in the case of ABS sidewalls, Arbor has choosen for a recycled material to improve the sustainability of their products.
  
  

EDGES

• Griptech
  Grip tech is a tri–radial sidecut design that is not “blended.” Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed. The extra contacts also form pivot zones that make turning easier and more natural. Grip tech effectively moves a board’s primary interface with the snow underfoot, allowing us to deliver designs that don’t lose performance as we lift leading sections of the effective edge from the snow for a less grabby ride. Those designs include rocker, or camber with our new uprise fenders. Uprise fenders pull the outside contact zones off the snow with angled 3º risers on all camber system designs.
  
  
• Recycled Steel Edges
  Highly durable, recycled steel edges embody two of Arbor's key values: quality and sustainability.
  
  
• 360° Fully Wrapped Sidewalls
  A 360–degree, fully wrapped sidewall that eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.
  
  
• Factory Tuned
  Detuning of the tip and tail contact points on all snowboards for a catch-free ride before they leave the factory.
  
  

SPLITBOARD TECH

• Universal Splitboard Insert Packs
  Provide a wide stance range, while at the same time delivering critical micro adjustability.
  
  

• Karakoram Ultra Clip
  Karakoram’s splitboard clip is powerful, easy to use, and light. Once joined, the UltraClip fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. The lever locks in the touring position as well to eliminate unwanted movement on the ascent
  
  

• Mix Mohair
  Mix Mohair skins use a mix of mohair and nylon and combine the benefits of both materials. The mix of materials provide the best balance in climbing and gliding properties.