COUPON CODES Up to €150 >>>

Aecre Oblivion 23/24 B-grade

Only %1 left
As low as €499.95
Including V.A.T.

Quick overview

This split will bring you into state of ‘oblivion’. With the Aecre Oblivion you will visit places never seen before. This well balanced split will make ‘kickturns’ a breeze and the camber will provide grip on the way up. A bit of taper, rocker in nose and the carbon V in tip and tail will make sure you can handle any sort of terrain. The radius makes it stable enough on speed and playfull within trees. Together with the multi-grip-tech you will have an all-mountain board for the intermediate to advanced rider to tackle any kind of terrain, with money to spare on your trip. 

The Aecre Oblivion comes in a Neoprene Snowboard Sleeve with a value of 49.95!



  • Camber Rocker Profile
    The Rocker in the nose will make sure you will float in the deepest powder. Camber will provide edge-hold, stability and pop. Due to the camber in the tail, the end of your turn will be more energetic and turn initiation will be a lot quicker.


  • Element Core
    By using different types of wood in the core you'll get a very dynamic board. Beech is hard, heavy and offers a lot of cushioning. Therefore used for placing the inserts. Poplar is one of the most used types of wood. It has a good weight to strength ratio and grows pretty fast. However it's more soft then some others. Paulownia has a better stiff to weight ratio than Poplar and therefore used to make the board lighter. Flexible Spruce is widely spread, easy to grow and process. Which makes it an environmentally good choice.


  • Carbon Stringers
    A lot of boards have additional stringers a top of the core to add characteristics or reinforce. Carbon gives the board more stiffness and pop/rebound. The pressure or power you put into it will come back instantaneously. This will give the board liveliness and a better turn initiation.

  • Biax-Triax Fiberglass
    Woven Fiberglass is necessary to increase boardlife, but it also adds torsional and axial stiffness and respons. By using a two and three layer sheet of fiberglass you will keep the ease of turning at lower speeds (biax) and add more power and precision to the edges (triax).


  • Sintered Base
    Sintered bases are made by compressing Polyethylene pellets. This creates a porous layer that absorbs wax and therefore slides well. If you don't wax this Sintered base, the gliding ability will decrease.


  • Multi Grip-tech
    There are placed small reversed sidecuts beside the inserts. These subtle 1.3mm bumps are extra contactpoints at the heel-and toeside of the board and will give you extra grip in icy conditions but not slow you down in softer conditions.

  • ABS Sidewall
    The ABS sidewall protects the core materials because we don't ride powder everyday. It can resist impacts and adds torsional rigidity. This ensures better edge-hold and grip. A must on every good board.

  • Steel Tip & Tail Bumper
    Aecre has placed a steel insert in the tip and tail. This makes the board much better protected against impact.


  • Union Tip Clips
    The Union Tip Clips are no-nonsens clips. Easy to adjust for some fine-tuning.


  • Neoprene Sleeve
    The Neoprene Sleeve is an ideal companion if you want to store your board, throw it in the trunk or even taking it on a flight. The neoprene stretches around the edges and gives a lot of protection. You can easily leave the bindings on, because of the opening at the inserts.


Aecre Oblivion 23/24 Sizechart
Size (cm) 157 158W 161 162W 165
Effective Edge (mm) 1175 1175 1205 1205 1235
Tip Width (mm) 300.8 312.8 307.2 320.2 314.7
Waist Width (mm) 258 268 261 271 267
Tail Width (mm) 293.1 305.1 299.6 312.6 307.1
Sidecut Radius (m) 7.6 7.6 7.7 7.7 7.8
Stance Setback (mm) -25 -25 -25 -25 -25
Taper (mm) 7.6 7.6 7.6 7.6 7.6
Stance Reference (mm) 565 565 570 570 575
Rider Weight (kg-lbs) 65-85 / 143-187 70-95 / 154-210 70-95 / 154-210 75-100+ / 165-220+ 75-100+ / 165-220+
Width Regular Wide Wide Wide Wide