Snowcountry Second Choice Snowboards

We sell second choice snowboards in 3 categories. All snowboards are sold with their regular product warranty. For any questions regarding a specific second chance product, please contact our customer service.

• B-Grade
  B-Grade snowboards can contain cosmetic defects and small production discrepancies. All of these defects are cosmetical and the snowboards are new and technically 100%.

• C-Grade
  C-Grade snowboards have transport damage, scratches on base or top sheet, or other small defects. These snowboards are new but might need some attention.

• Demo
  Demo snowboards are used by our team for testing purposes. They are in a good state and well serviced.

• CamRock
  A hybrid rocker / camber profile with a symmetrical tip and tail. The rocker resides in the nose, with a light camber between the feet. The camber is between your feet as a spring keeping your contact points on the ground as you go in and out of turns allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more allowing it to float. This creates a super versatile board profile that performs under all conditions.

• Triax
  A snowboard often has two layers of fiberglass. A bottom and top layer. Both layers in this board are made of 3-dimensional fiberglass at a 45-degree angle. 3-dimensional fiberglass provides good torsional rigidity. This provides stability and response and is often used in boards for the more experienced rider.

• Biax
  A snowboard often has two layers of fiberglass. A bottom and top layer. Both layers in this board are made of 2-dimensional fiberglass at an angle of 90 degrees. 2-dimensional fiberglass gives a slight torsional stiffness while maintaining comfort and a playful character.

• Sintered Spec base
  A recycled sintered base made by extrusion. The properties are close to those of sintered bases, but due to heating and pressing, the base has become softer. This base lies between Extruded and Sintered. Harder and faster when properly waxed.

• Underbite Edges
  Underbite aims to increase edge grip and ease of turning. The steel edges are slightly pulled inward at the height of the inserts. The result is an increased grip so that you can put more force on your steel edges. This makes your turns a lot easier.

• Forever Flex
  Forever Flex is the 'breaking' of the board. By bending the board before use, it is as if you have already ridden the board for a number of days. As a result, the flex of the board in your hands will remain stable and will change less with use.