• CamRock
  A hybrid rocker / camber profile with a symmetrical tip and tail. The rocker resides in the nose, with a light camber between the feet. The camber is between your feet as a spring keeping your contact points on the ground as you go in and out of turns allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more allowing it to float. This creates a super versatile board profile that performs under all conditions.

• Poplar/Bamboo/Paulownia
  Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

• CoreLess Tech
  Lighter, better turning and more buoyancy. By omitting the core in the tip and tail, the limitations of shapes have also been removed. This has created the possibility for YES to accommodate a powder hull in the 20/20. A freestyle board with a lot of float. Your freestyle tricks in the backcountry are no longer a utopia.

• Triax
  A snowboard often has two layers of fiberglass. A bottom and top layer. Both layers in this board are made of 3-dimensional fiberglass at a 45-degree angle. 3-dimensional fiberglass provides good torsional rigidity. This provides stability and response and is often used in boards for the more experienced rider.

• Sintered True base
  A sintered base is made from grains of coarse powder that are pressed until they form a solid. Genuine sintered base is harder and more expensive than extruded base. It can therefore be faster for those who drive aggressively and fast, provided the base is waxed according to the circumstances.

Tapered Midbite blends the response of a narrow waist width with the stability of a wider nose and narrower tail for powder flotation. The design steps a single section of each sidecut inwards between the insert packs. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut we maintain a wider board width that improves float in pow and is a stable platform. The Step inwards on the front is deeper than the Step outwards on the back creating a slight taper in the tail allowing the tail to be just a little narrower than the nose but without losing the twin feel.

• Forever Flex
  Forever Flex is the 'breaking' of the board. By bending the board before use, it is as if you have already ridden the board for a number of days. As a result, the flex of the board in your hands will remain stable and will change less with use.