YES All In B-grade 23/24

• CamRock
  A hybrid rocker / camber profile with a symmetrical tip and tail. The rocker resides in the nose, with a light camber between the feet. The camber is between your feet as a spring keeping your contact points on the ground as you go in and out of turns allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more allowing it to float. This creates a super versatile board profile that performs under all conditions.

• Full Poplar
  The baseline core for tip to tail woodcore snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.

• Biax
  A snowboard often has two layers of fiberglass. A bottom and top layer. Both layers in this board are made of 2-dimensional fiberglass at an angle of 90 degrees. 2-dimensional fiberglass gives a slight torsional stiffness while maintaining comfort and a playful character.

• Extruded base
  Formed by extrusion. It is softer than the other two bases. Which isn’t necessarily a bad thing. At the speeds many of us ride, this material is actually quicker (gets up to speed faster) than sintered when waxed correctly. It also retains wax better because it’s more porous and is easy to fix with a P-Tex stick if you get scratches in it.

Tapered Midbite blends the response of a narrow waist width with the stability of a wider nose and narrower tail for powder flotation. The design steps a single section of each sidecut inwards between the insert packs. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut we maintain a wider board width that improves float in pow and is a stable platform. The Step inwards on the front is deeper than the Step outwards on the back creating a slight taper in the tail allowing the tail to be just a little narrower than the nose but without losing the twin feel.

• Forever Flex
  Forever Flex is the 'breaking' of the board. By bending the board before use, it is as if you have already ridden the board for a number of days. As a result, the flex of the board in your hands will remain stable and will change less with use.