Furberg Freeride Split + Skins 23/24

Only %1 left
As low as €688.97 Regular Price €1,059.95
Including V.A.T.
More Information
Weight class 2.5kg - 3.0kg
Supplied accessories Skins

Quick overview

The Furberg Freeride Split was designed with one goal in mind; to outperform every other board on the deepest days. Its rocker-low camber in combination with reverse sidecut in nose and tail makes it effortless to ride. To further improve the performance in powder they have added a small fishtail, but kept the tail high enough to still make it possible to land switch every now and then. Its long sidecut radius (+/- 10m) and reverse sidecut in tip and tail make this board calm, forgiving and catch free. This board can charge hard in all conditions despite its powder specific shape.



Furberg Freeride Split 161: Instead of a spacing of 27mm between the heel riser inserts on Freeride Split 161, they have a spacing of 25,5mm. Freeride Split 161 is compatible with Plum and Union bindings and Voile Tour STS or Phantom Rocket heel risers for hardboots.
For Spark Arc or Surge, the hole farthest to the back on the heel rest would have to be extended by 1,5mm in order to fit properly.


  • Low Camber
    The best compromise between the flotation of full rocker, responsiveness and grip of camber.


  • Rocker and Reverse Sidecut
    When a board is ridden flat on the snow, a long rocker transition will make the nose of the board impact irregularities with a low angle of incidence and slide over with little resistance. Furberg combined the rocker with a reverse sidecut in nose and tail to maintain this low angle of incidence when riding the board on edge.The long transitions of the reverse sidecut make the board turn more effortlessly since the typical pressure points at the end of the effective edge do not exist. The overall result is a very catch-free and surfy board.


  • Long Turn Radius
    It is standard to use a longer turning radius on a freeride ski than on a slalom ski in the skiing industry; however, Furberg Snowboards is the only brand to adapt the turning radius for freeride snowboards. A longer turning radius generates better stability at higher speeds and, more importantly, gives the boards a calmer and more forgiving behavior by distributing the edge pressure over the entire contact length.


  • Poplar/Paulownia/Ash Core
    Along the edges, Furberg uses ash instead of poplar for improved durability. The rest of the core is a mix of poplar and paulownia, with the lighter wood in less critical areas. 250g and 350g lighter then the Poplar core.


  • Triax Fiberglass
    Triaxial fiberglass is used to get a good torsional stiffness of the snowboard.


  • Isosport 7500 Sintered
    Isosport 7500 Sintered is one of the fastest bases available on the market. The base is 1.3 mm thick, which is thicker than industry standard. This means that you can hit rocks harder without getting core shots and you can stone grind the base more times. The thicker base does add a few grams on the weight, but more importantly it gives the board a much longer life.


  • Isosport Brushed Polyamide Topsheet
    The Isosport Polyamide topsheet is one of the most durable topsheets on the market. The texture makes the topsheet very scratch resistant and less snow sticks to it. Furberg also makes all their topsheets in light colors to further avoid snow sticking to them. Dark colored topsheets get warmed up more by the sun and therefore more snow will freeze to them. This is a simple, yet effective way to save weight without compromising on durability and performance.


  • ABS Sidewalls
    Provides enhanced durability while keeping the core safe from moisture.


  • Rockwell Hardness 48 Edges
    The edges are considerably beefier than the industry standard, to be able to withstand harder impacts without cracking or deforming. The edges are fully wrapped around the board for maximum durability.


  • Floorboard Technology
    The tongue and groove on Furberg's splitboards eliminates movement between the board halves. Gone is the lack of response that splitboards used to suffer from.


  • Splitboard scraper
    In some specific conditions, snow tends to stick to your splitboard. This happens every now and then and is something most splitboarders are aware of. To make transitions a bit simpler on these days, Furberg developed a scraper tool to clean the inner edges and sidewalls from snow.


  • Extra heel riser inserts
    Furberg splitboards come with an extra set of inserts for better hardboot compatibility.



Furberg Freeride Split 23/24 Sizechart
Length (cm) 151 156 161 166
Nose Width (mm) 286 296 306 316
Waist Width (mm) 252 262 272 282
Tail Width (mm) 274 284 294 304
Turning Radius (m) 9.2 9.8 10.4 11
Shoe Size (mondo) 23-26 25-29 26-30 27-31
Rider weight (kg) 50-70 60-80 70-90 75+
Board weight (g) 2950 3100 3250 3400